BASIC USES
For both thin-bed and medium bed installations of marble, slate,
granite, pre-cast terrazzo, porcelain tile, and most types of ceramic
and stone tile on properly prepared substrates of concrete, masonry, cement terrazzo, concrete backer units, existing surfaces of ceramic or stone tiles. Recommended for exterior and water immersion installations, and for use over Flextile WP980 Waterproof & Crack Isolation Membrane and other Flextile Surface Preparation products. May also be used for interior installations on Exterior Grade Plywood Floors and over existing surfaces of well-bonded VCT/VAT or other non-cushion vinyl flooring, and cutback adhesive residue (dry areas only).

COMPOSITION and MATERIALS
A two-component, fast-setting, fast-curing hydraulic mortar for
both exterior and interior installation of ceramic tile, marble and
granite. Special fast curing hydraulic cement allows for tile to be
grouted and light traffic within 3 - 4 hours of application, and for
full service after 24 hours. Mixed with a premium high solids acrylic
latex additive component, this high performance system provides
superior bonding and movement capabilities, and physical
properties such as impact, vibration, aging, freeze/thaw, and
cleaning chemicals resistance.

FEATURES

• For interior and exterior floor, wall and ceiling installations.
• Recommended for Water Immersion Installations.
• Fast curing - Tile can be grouted within 2-4 hours, and tiled areas quickly ready for use.
• Allows medium bed installations of large dimension, heavy textured tile and stone.
• Saves both time and money.

click on Product Data Sheet for more features