BASIC USES
For installation of mosaic tile, marble, absorptive or non-vitreous tile on vertical surfaces of concrete, concrete block, masonry, brick and, in dry interior areas only, gypsum wallboard. For exterior installations, for setting porcelain tiles, or for installation of tile over exterior grade plywood surfaces (dry interior areas only), mix with Flextile 43 Thin-Set Mortar Additive or Flextile 44 High Solids Thin-Set Mortar Additive.

COMPOSITION and MATERIALS
A dry-set mortar consisting of a blend of Portland Cement, mineral fillers and water retentive additives packaged in dry powder form to be mixed with water or latex mortar additive just prior to use. Cures to provide good bond strength with minimal shrinkage. Available in Grey & White.

FEATURES

• Higher concentration of water retentive additives for use with absorptive tiles
• Finer texture for use with mosaic tile or other thin wall tile
• Excellent slip resistance on vertical applications
• High cement content
• Excellent workability
• Non-Flammable
• Water resistant when cured